Product structure and composition:
- Components: Fluid guide joint, adjustment knob, adhesive, needle seat, rubber injection sleeve, housing, needle tube and negative pressure suction end.
- Materials for some parts: Needle seat, fluid guide connector and housing are polypropylene special material as per YY/T 0242-2007. Rubber injection sleeve is polycarbonase special material as per YY/0806-2010. Needle tube is austenitic stainless steel 304 material as per GB/18457-2015.
- Sterilization method: Ethylene oxide sterilization. Result: Sterile product.
Scope of application:
After this product is assembled with a disposable sterile syringe, it can be used as an electronic syringe to inject sodium hyaluronate into the dermis of the face. This product can only be operated by qualified medical personnel and is limited to use in medical institutions.
Precautions:
- Operated by trained medical personnel. Read instruction manual carefully and follow aseptic operation standard.
- Sterilized by ethylene oxide. Don't use if original packaging is damaged.
- Valid for three years from sterilization date. Check production date, batch number and expiration date before use.
- Turn adjustment knob gently. Don't use needle tube longer than 2mm as it may damage injection needle.
- Avoid injecting into blood vessels. Maximum negative pressure resistance is -650mmHg.
- For single use only. Dispose according to medical waste management requirements. Must be used with compatible electronic injector and follow relevant regulations.
